Products
Contact Us
- Room 501-5, Building 8, Longdong Avenue 3000, Pudong New District, Shanghai, China
- +86-18918301200
- Grace Xia
- jorsun01@jorsun.com.cn

Lamella clarifier LST1
LST1 lamella clarifier uses inclined plates for compact, high-efficiency settling of settleable solids.
Key Features
- High efficiency solid-liquid separation
- Compact design, easy installation
- Low operation and maintenance cost
Request a Quote
×The LST1 Lamella Clarifier applies the shallow-tank sedimentation principle to remove settleable solids from water and wastewater in a compact footprint. Inclined lamella plates are installed as modules inside the tank, so the effective settling area equals the total projected plate area rather than the tank floor area. Flocculated water enters a central feed chamber that distributes flow evenly across every plate, solids slide down into the bottom sludge hopper, and clarified effluent overflows a triangular weir or perforated launder at the top. The LST1 delivers high clarification capacity with a much smaller footprint than a conventional clarifier.


JORSUN Lamella Clarifier Plants are successfully operated for a wide variety of industrial and water treatment applications, such as:
B- Backwash water (sand filter, UF etc)
F- Food
G- Groundwater
L- Leachate
M- Meat processing
M- Metal finishing
M- Mining and mineral processing
P- Potable water clarification
R- River pre-sedimentation
R- RO concentrated liquor
S- Semiconductor
S- Slaughter
T- Textile and dyeing
W- Washing water (plastic, vegatable etc )
●Experience from thousands of applications in a variety of fields.
●Save installation time. JORSUN units are deliveryed as prefabricated units. Very easy for installation.
●Quick in response to provide excellent international services. Served clients are over 50 countries aross the world.
●Various constructed material. Carbon steel epoxy coating or FRP lining, stainless steel SUS304 or SUS316L, duplex steel 2205 or 2507.
Model | Capacity | Dimension(m) | Nozzle list(DN) GB/JIS/ANSL | |||||
(m3/h) | L | W | H/H1 | Inlet | Outlet | Sludge | Backwash | |
LST1-005 | ~5 | 2.6 | 1.6 | 2.9/2.9 | 80 | 50 | 50 | 50 |
LST1-010 | ~10 | 3.4 | 1.8 | 3.6/1.8 | 100 | 80 | 50 | 50 |
LST1-020 | ~20 | 3.4 | 2.2 | 3.6/1.8 | 150 | 100 | 50 | 50 |
LST1-030 | ~30 | 4.2 | 2.2 | 4.0/2.2 | 150 | 150 | 50 | 50 |
LST1-040 | ~40 | 5.3 | 2.2 | 3.6/1.8 | 200 | 150 | 50*2 | 50 |
LST1-050 | ~50 | 6.3 | 2.2 | 3.8/2.0 | 200 | 200 | 50*2 | 50 |
LST1-060 | ~60 | 7.2 | 2.2 | 4.0/2.2 | 250 | 200 | 50*2 | 50 |
LST1-070 | ~70 | 7.2 | 2.6 | 4.0/2.2 | 250 | 200 | 50*2 | 50 |
LST1-080 | ~80 | 7.2 | 2.7 | 4.0/2.2 | 250 | 200 | 80*2 | 50 |
LST1-090 | ~90 | 6.7 | 3.1 | 4.0/2.2 | 250 | 250 | 80*2 | 50 |
LST1-100 | ~100 | 7.2 | 3.1 | 4.0/2.2 | 250 | 250 | 80*2 | 50 |
LST1-120 | ~120 | 8.3 | 3.3 | 4.0/2.2 | 250 | 250 | 80*2 | 50 |
LST1-150 | ~150 | 9.8 | 3.3 | 4.0/2.2 | 250 | 250 | 80*2 | 50 |

Remark: To make the most suitable proposal, we will need know flowrate, wastewater source,wastewater quality (SS, BOD, COD, FOG etc ).
●Higher efficiency: inclined plates extended to 1.5-2m, separation efficiency improved 1.5-2.0 times higher than others.
●Equal water distribution and synchoronous water collection technology.
●Compact design to save 80% footprint than traditonal sedimentation tank.
●No plates clogging. No sludge discharge blind angle.
Clarifier tank:
●Mild steel Q235B with epoxy coating
●Mild steel Q235B with FRP lining
●Stainless steel SUS304
●Stainless steel SUS316L
Lamella plates:
●UPVC
●PP
●Stainless steel
220V/240V/380V/400V/415V/440V/460V/575V
GB/JIS10K/ANSI150/DIN/BS
How can I send you the RFQ?
A: You can contact us by email or call or leave message on the website.
What info do I need provide you to make the proposal?
A: Pls provide us flowrate per hour, wastewater industry, wastewater quality (SS, BOD, COD, FOG etc) to be treated by our equipments, as detalied as possible. If you have jar test photo or video, that would be also good.
Are you the direct manufacturer with workshop?
A: Yes. We fabricate thoese equipments in our own workshop from material cutting, bending, welding, painting, assembling to test and commissioning before delivery. Occupied area is around 10,000 square meters.
What material can you offer? And what’s the most popular option?
A: We can fabricate carbon steel with epoxy coating or FRP lining, SUS304, SUS316L.Generally for ordinary wastewater not corrosive, carbon steel with epoxy coating is the most popular and cost-effective one. If corrosive, carbon steel with FRP lining is also a good option.
How to ship your equipments?
20’GP,40’HQ or 40’FR (large flowrate )
How to install your equipment after receiving the goods?
A: Detalied manual book will be provied. We can also provide remote video guidance if necessary. Besides, our equipment is designed as a complete system, and automatic operation. So generally you only need connect the inlet/outlet nozzle, and extrernal cable. We have lots of experience in oversea projects, we are confident in helping you eliminate this concerns.
Do you provide after sales services as my project is not in China?
A: Of coure. Our sales and technician will reply to you on the day or next day (time gap). We think highly of after sales service as a reputed DAF and Lamella clarifier brand manufacturer.

